7. Installing the grille
7.5. Installing the intake grille (Fig. 7-12)
Note:
When reinstalling the corner panels (each with a safety strap attached), con
-
nect the other end of each safety strap to the grille as shown in the illustration.
* If the corner panels are not attached surely, they may fall off while the main unit is
operating.
• Perform the procedure that is described in “7.2. Preparing to attach the grille” in
reverse order to install the intake grille and the corner panel.
• The direction of the intake grille can be changed according to the wishes of the
customer.
A
Screw (4 × 16)
B
Corner panel
C
Safety strap
D
Hook
E
Water pipe
F
Drain pipe
G
Company logo
* Installation in any position is possible.
H
Initial position of the levers on the intake grille
* Although the clips can be installed in any of 4 positions, the configuration shown
here is recommended. (It is not necessary to remove the intake grille when main-
tenance is performed on the electrical box of the main unit.)
A
D
C
B
H
F
G
E
Fig. 7-12
19
en
BT79D035H01_en.indd 19
2019/07/30 11:12:56
021