English-26
Main-Menu
ADVANCED OPTION
Sub-Menu
INPUT RESOLUTION
*:INPUT RGB2/3 only
*:INPUT VIDEO<S>,
VIDEO only
GAMMA SELECTION
BLACK LEVEL
EXPANSION
SCAN MODE
*:INPUT DVD/HD
VIDEO<S>, VIDEO only
*:INPUT DVD/HD
VIDEO<S>, VIDEO only
*:INPUT DVD/HD
VIDEO<S>, VIDEO only
SCAN CONVERSION
FILM MODE
IR CONTROL
TILING
TILING demonstrates multiple screens. This
feature provides a single large screen using up
to 16 monitors. It will be able to divide up to 4
each H and V. This requires you to feed the
PC output into each of the monitors through a
distributor.
H MONITORS: Select number of horizontal divide.
V MONITORS: Select number of vertical divide.
POSITION: Select a position to expand the screen.
FRAME COMP: Works in tandem with TILING
to compensate for the width of the tile bezels in
order to accurately display the image.
ENABLE: Select "YES", the monitor will
expand the selected position. PIP and STILL
will be disabled when "TILING" is activated.
Selects to decision of input signal about below
timings, 1024x768, 1280x768 and 1360x768.
AUTO: Determines the resolution automatically.
1024x768: Determines the resolution as 1024x768
1280x768: Determines the resolution as 1280x768
1360x768: Determines the resolution as 1360x768
Selects a display gamma.
2.2
2.4
S gamma
Native
NOTE: sRGB picture mode is standard and
cannot be changed.
Selects a level of black expansion.
In case of go under the black cut-off level,
please adjust the "Black level" in moderation
on OSD menu.
Changes the display area of the image.
OVERSCAN: Set to display area about 95%
UNDERSCAN: Set to display area about
100%
Selects IP (Interlace to Progressive) converter
function. PROGRESSIVE: Enable the IP
function, to convert interlace signal to
progressive. Normally use this setting.
INTERLACE*: Disable the IP function.
*NOTE: This mode is better suited for motion
pictures, but it is in danger of image retention.
Selects Film mode function.
AUTO: Enable the Film mode function. This
mode is better suited for movies, which is
converted 24 Frames/sec source to DVD Video.
We recommend to select "PROGRESSIVE" in
"SCAN CONVERSION".
OFF: Disable the Film mode function. This mode
is better suited for Broadcasting or VCR source.
Selects the infrared wireless remote controller
mode.
The item in this menu will become effective by
pressing "SET" button on the selected item.
NORMAL: The monitor will be controlled
normally by wireless remote controller.
LOCK: Disable the monitor control by infrared
wireless remote controller.
Keep pressing "DISPLAY" button during 5 sec
or more, this setting will return to "NORMAL".
