manualshive.com logo in svg

Mitsubishi Electric AT-50B, Installation Manual

Share
Download
Mitsubishi Electric AT-50B Installation Manual Download Page 9

– 9 –

1-8. Using an SD memory card

1-9. Optional Parts

1-10. Note

A protective film is placed on the display.

Remove the protective film off the display before use.

The AT-50B has a slot for an SD memory card at the bottom that
can be used to update software.
Refer to section “To Update The Software (as necessary)” on the
last page for the detailed information about updates.
*Only the 1GB and 2GB SD memory cards by SanDisk are
supported. 

Parts

Model

Usage

Note

External input/output 
adapter

PAC-YT51HAA

Enables the use of external 
input/output function

Required to use the external input/output function
5-wire cable (input), 4-wire cable (output)

“SD Logo is a trademark of SD-3C, LLC.”

(a)

(b)

(c)

(a) Remove the SD memory card slot cover from the controller.

(b) Insert the SD memory card into the slot until it clicks.

(c) To remove the SD memory card, push it in until it clicks. 

Bottom of controller

SD memory slot (for program updates)

WT06990X04_GB.book  9 ページ  ２０１８年５月２２日　火曜日　午後１時５５分

Summary of Contents for AT-50B





















Reviews:

No comments

Brands by name

Popular brands

Load more brands