English-32
U-1
Turning on all the connected devices (continued)
Power Management Function
This function reduces the power consumption of the monitor
when the keyboard or the mouse is not used for a fi xed period
even though the power of the monitor is on.
While this function is working, the screen becomes dark and
the power indicator glows green and red.
This function is available only when a computer equipped
with the VESA-approved DPM Power Management function is
connected to the monitor.
When the power saver in the OSD menu is turned ON, the
power management function works.
RGB:
When the sync signal of computer input (HDMI1,
HDMI2, DVI-D, D-SUB, DISPLAYPORT) is terminated,
the monitor will be in the sleep mode in several
seconds.
VIDEO: When the sync signal of video input (YPbPr, S-VIDEO, or
VIDEO) is terminated, the monitor will be in the sleep
mode in approximately 10 minutes.
[Description]
DPM: Acronym for Display Power Management
NOTE:
• The default power management settings (power savers) for
RGB and VIDEO are ON.
• When an expansion module is in the option slot, the monitor
doesn’t enter the sleep mode even when POWER SAVE in
the CONFIGURATION1 menu is set to ON. Even when other
video input is selected, the monitor doesn’t enter the sleep
mode.
Power Indicator
Status
LED
Power-on mode
Green
Power-off mode
Red
Power Standby when
“SCHEDULE” is enable
Red On
Green Blinking
Sleep mode
Red, Green
The main power is off.
Off
Diagnosis (Detecting failure)
Red Blinking
* See troubleshooting on page 63.
Summary of Contents for A3112
Page 1: ...LCD Display Monitor MODEL ...
