28
Appendices
For assistance call 1(800) 332-2119
Appendix A: Auto Input Sensing
About Auto Input Sensing
This TV’s Easy Connect™ Auto Input Sensing feature
detects the following connections automatically:
•
Analog video jacks
•
HDMI inputs (when powered on)
Auto Input Sensing for Most Devices
When you first connect a device, the TV will:
a. Detect the connected device and automati-
cally switch to it.
b. Prompt you to identify the device type.
c. Repeat these steps for other newly detected
devices.
When You First Connect a Device
•
Most Device Types.
Select the device type from
the on-screen list. The device type you select here
will appear as an icon in the
Input Selection
menu.
•
A/V Receiver.
For an HDMI-equipped A/V
receiver, select
AVR
from the list of device types if
the A/V receiver is not recognized automatically.
•
HDMI CEC Devices Compatible with the
TV’s HDMI Control Feature.
Compatible
CEC-enabled HDMI devices are often recognized
automatically by the TV. HDMI Control may allow
you to control some functions of a CEC-enabled
device. See the supplemental Owner’s Guide at
www.mitsubishi-tv.com
.
New Device Found screen for a device with HDMI
control enabled. Select On if you want to enable the
TV’s HDMI control of the device. In some cases, as
in the example, you will also be prompted to select a
device name.
Note:
When
HDMI Control
is set to
Off
, the TV
may still respond to CEC commands sent by
another device. To prevent this, turn off HDMI
Control in the device using the device’s own
menus.
Tips on Auto Sensing
•
Choose a different name for each input.
•
The antenna input (
ANT
) and
Bluetooth®
are
never auto-detected. You can remove the unused
icons from the
Input Selection
menu in the
Inputs
>
Name
menu.
•
Change the device type displayed in the
Input
Selection
menu by using the
Inputs > Name
menu.
•
Some HDMI devices can automatically tell the TV
what name to use in the
Input Selection
menu
and you will be unable to change the name.
•
The TV is unable to detect a new connection if
the current input is
Bluetooth®
or the Internet.
Switch to a different input before connecting.
Reactivating Auto Input Sensing for an HDMI Input
After you disconnect an HDMI device, Auto Input
Sensing is temporarily disabled and the disconnected
device still appears in the
Input Selection
menu.
Perform these steps:
1.
Power off the device.
2.
Disconnect the HDMI cable.
3.
Press
MENU
on the TV remote control to enter the
TV main menu.
4.
Go to
Inputs > Name
.
5.
Highlight the HDMI input name and press
ENTER
to
select
Delete
.
6.
Press
EXIT
to clear the menus.
Inputs > Name menu with
Delete
selected for
HDMI-3.
7.
Connect the new device and the
New Device
Found
screen will display.
Summary of Contents for 742 Series
Page 43: ......