Mitsubishi Electric 65313 Service Manual Download

Page: 5 / 68

MODELS: WS-48313 / WS-48413 / WS-55313 / WS-55413 / WS-65313 / WS-65413

Page 5

INTRODUCTION

This service manual provides service instructions for the PTV Models listed below. Service personnel should read this

manual thoroughly before servicing these chassis.

This service manual includes:

1. Assembly and disassembly instructions for the front and rear cabinet components.

2. Servicing of the Lenticular Screen and Fresnel Lens.

3. Servicing printed circuit boards (PCBs).

4. CRT replacement procedure.

5. Electrical adjustments.

6. Chip parts replacement procedures.

7. Circuit path diagrams.

The parts list section of this service manual includes:

1. Cabinet and screen parts.

2. Electrical parts.

Schematic and block diagrams of the above listed models are included in this service manual for better under-

standing of the circuitry. PCB drawings are also included for easy location of parts and test points.

PRODUCT SAFETY NOTICE

Many electrical and mechanical parts in television receivers have special safety related characteristics. These

characteristics are often not evident from visual inspection nor can the protection afforded by them necessarily be

obtained by using replacement components rated for higher voltage, wattage, etc.

Replacement parts which have special safety characteristics are identified in this service manual.

Electrical components having such features are identified by shading on the schematic diagram and by

bold

type

in the parts list of this service manual.

The replacement for any safety part should be identical in value

and characteristics.

V22 Chassis

V22+ Chassis

WS-48313

WS-48413

WS-55313

WS-55413

WS-65313

WS-65413

Summary of Contents for 65313





































































Search results

Summary of Contents for 65313

Reviews:

Related manuals for 65313

Brands by name

Popular brands

Mitsubishi Electric 65313, Service Manual

Search results

Summary of Contents for 65313

Reviews:

Related manuals for 65313

Brands by name

Popular brands