background image

Please check www.mitsubishi-tv.com for updates on 3D signals and safety.

2

 

 

Product:

3D Adapter

Model:

3DC-100S

Responsible 
Party:

Mitsubishi Electric 
Visual Solutions 
America, Inc.
9351 Jeronimo Rd.
Irvine, CA 
92618-1904

NOTE:  This equipment has been 

tested and found to comply with 

the limits for a Class B digital 

device, pursuant to Part 15 of 

the FCC Rules.  These limits are 

designed to provide reasonable 

protection against harmful inter-

ference in a residential installation.   

This equipment generates, uses 

and can radiate radio frequency 

energy and, if not installed and 

used in accordance with the 

instructions, may cause harmful 

interference to radio communi-

cations.  However, there is no 

guarantee that interference will not 

occur in a particular installation.   

If this equipment does cause 

harmful interference to radio or 

television reception, which can 

be determined by turning the 

equipment off and on, the user is 

encouraged to try to correct the 

interference by one or more of the 

following measures:
•  Reorient or relocate the 

receiving antenna.

•  Increase the separation 

between the equipment and 

receiver.

•  Connect the equipment into 

an outlet on a circuit different 

from that to which the receiver 

is connected.

•  Consult the dealer or an expe-

rienced radio/TV technician 

for help.

FCC Information

1)  Read these instructions.

2)  Keep these instructions.
3)  Heed all warnings.

4)  Follow all instructions.

5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.

7)  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) that 
produce heat.

8)  Only use attachments/accessories specified by the manufacturer.
9)  Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, such 
as power-supply cord or plug is damaged, liquid has been spilled or 

objects have fallen into the apparatus, the apparatus has been exposed 
to rain or moisture, does not operate normally, or has been dropped.

Important Safety Instructions

WARNING.  To reduce the risk of fire or electric shock, do not expose this 

apparatus to rain or moisture.

Summary of Contents for 3DC-100S

















Reviews: