For assistance call 1(800) 332-2119
3
Battery Installation
Emitter
1
2
1.
Remove the cover.
2.
Insert the battery, positive side up. Be sure
the retaining clip holds the battery securely.
3.
Reinstall the cover.
To remove the battery,
press on the retaining clip.
POWER
POWER
3D MODE
3D STATUS
IR Sensor
POWER
Light
Lit when power is on.
3D STATUS
Light
Lit during 3D signal processing.
POWER
Button
Allows manual override of auto on/off. Press to power
off the Adapter if it powers on when not needed,
3D MODE
Button
Allows manual selection of 3D format conversion.
Controls and Indicators
POWER
3D MODE
Adapter
Remote Control
Lithium Battery Safety
This product uses a CR2025 Li/MnO2 lithium coin battery.
WARNING:
Lithium coin cell batteries pose a serious risk of injury if
ingested. Keep cells out of reach of children. If ingested immediately
contact a physician or the National Poison Center at 202-625-3333.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type (CR2025).
CAUTION:
Risk of fire and burns. Do not recharge, disassemble,
heat above 100
˚
C (212
˚
F), or incinerate. Keep battery out of reach of
children.
Disposal.
Dispose of used batteries promptly according to local
recycling or waste regulations.
The remote control requires one CR2025 lithium battery.
