LS45 / LS55 / LS55x Electric Logsplitter
7
Original Instructions Version October 12
Do not attempt to split seasoned logs. Green logs split much more easily, and will not put undue pressure on
the splitter.
Seasoned logs can also split violently, which can be dangerous to the operator.
If after 5 seconds the log splitter fails to split the log, remove the log and rotate the log by 90º. If the log
splitter still fails to split the log then the log hardness exceeds the capacity of the log splitter and should be
discarded to prevent damage to the machine.
Always set logs firmly on the log retaining plates and work table.
Make sure logs will not twist, rock or slip while being split. Do not
force the blade by splitting the log on the upper part. This will
break the blade or damage the machine.
Split the log in the direction of its growing grain. Do not place a log across the log splitter for splitting. It may be dangerous and may
seriously damage the machine. Do not attempt to split 2 logs at the same time. One of them may fly up and hit you.
OPTIONAL 4 WAY SPLITTING CROSS
Mount the 4 way splitting cross over the splitting wedge, ensuring
that it is firmly secured.
The 4-way splitting cross is only to be used on freshly
cut wood and not seasoned wood as this type of wood
can splinter and put undue strain on the log splitter.
FREEING A JAMMED LOG
• Release both controls.
• After the log pusher moves back and completely stops at its
starting position, lift the log from the push block end to free it.
• Do not use a hammer to try to knock the log free. This can
damage the machine or release tension in the log causing
an accident.
