LS45 / LS55 / LS55x Electric Logsplitter
5
Original Instructions Version October 12
DESCRIPTION OF MACHINE
The log splitter is designed to be used in a domestic application.
The log splitter is designed exclusively for the following applications:
-Splitting freshly cut timber that does not exceed the dimensions specified in the technical data.
The 4-way splitting cross is only to be used on freshly cut wood and not seasoned wood as this type of wood
can splinter and put undue strain on the log splitter.
APPLICATION CONDITIONS
This log splitter is designed to operate under ambient temperatures b5ºC and 40ºC. It can be stored or transported under
ambient temperatures between -25ºC and 55ºC.
SPECIFICATIONS
Model Number
LS45
LS55
LS55X
Motor
1500W
2200W
2200W
Log Capacity
Diameter
50 ~ 250mm
Length
520mm
Maximum Force
4.5 Ton
5.5 Ton
5.5 Ton
Hydraulic Pressure
2320 PSI
2900PSI
2900PSI
Hydraulic Oil Capacity
3.5 L
Overall Sizes
Length
940mm excluding optional stand
Width
270mm excluding optional stand
Height
510mm excluding optional stand
Weight
44kg
45kg
54.3kg
* The diameter of the log is a guide - a small log can be difficult to split when it has knots or a particularly tough fibre. On the other
hand, it may not be difficult to split logs with regular fibres even if their diameter exceeds the max. figure indicated above.
ELECTRICAL REQUIREMENTS
With a 230 Volt / 50Hz motor, the log splitter should be connected to a standard 230V+10% / 50Hz+1Hz. electrical supply as well as
a residual current device (RCD) with the maximum residual current Rated at 0.03A.
