CS38 / CS41 SELECT Chainsaw
24
Original Instructions Version July 16
CS38-41_130716
Saw Chain Sharpening
The chain needs to be sharpened when:
1.
Sawdust becomes powder-like.
4.
You need extra force to saw with.
2.
The cut path does not go straight.
5.
Vibration increases.
3.
Fuel consumption increases.
Be sure to wear safety gloves.
• Clamp chainsaw guide bar in a vice to secure.
• Sharpen chain with a 5/32 (4mm) file and holder (Oregon part number 16265) / Sharpening kit
(Oregon part no 90405)
• Place your file on the cutter and push straight forward. Keep the file position.
• After every cutter has been set, check the depth gauge and file it to the proper level.
• Make sure every cutter has the same length and edge angles as illustrated.
4 mm
