455CSX / 515CSX PREMIUM Chainsaw
17
Original Instructions Version July 18
455CSX/515CSX_030718
Operating the Engine
1.
Fill fuel (1) and chain oil (2) tanks respectively, and tighten the
caps securely..
2.
Press the primer button (3) 6 times.
3.
Turn choke lever anti-clockwise (4). The choke will close and the
throttle will be set in the starting position.
4.
Apply the chain brake (7) by pushing the chain brake forwards.
5.
Place the saw on the ground, grip the front handle with your left
hand, place your right foot through the rear handle. Pull the starter
handle with your right hand.
NOTE: While holding the chain
saw securely on the ground, grip the starter handle, slowly
pull out the cord with your right hand until you feel some
resistance (the starter pawls grip), and now quickly and powerfully pull the
cord
8.
When the engine has tried to fire, turn choke lever clockwise (4) and then pull the
starter handle again to start the engine.
9.
As soon as the engine is running, pull the throttle lever slightly to reset the throttle control
to idle. This must be done as soon as the engine has started to avoid unneccessary wear
on the clutch.
NOTE: Disengage the chain brake by pulling the chain brake towards the
front handle prior to cutting.
