280BVX Blower/Vacuum
9
Original Instructions Version July 15
F) ENVIRONMENTAL PROTECTION
Environmental protection should be a priority of considerable importance when using the
machine, for the benefit of both social coexistence and the environment in which we live. Try not
to cause any disturbance to the surrounding area.
• Scrupulously comply with local regulations and provisions for the disposal of oils, petrol,
damaged parts or any elements which have a strong impact on the environment; this waste must
not be disposed of as normal waste, it must be separated and taken to specified waste disposal
centres where the material will be recycled.
• Scrupulously comply with local regulations and provisions for the disposal of waste materials.
•
A
t the time of decommissioning, do not pollute the environment.
OPERATING INSTRUCTIONS
1. PREPARE THE MACHINE
The machine can be used as both a blower and a vacuum collector; for both of these uses it is
necessary to correctly arrange the appropriate accessories included with the equipment.
Unpacking and completing the assembly should be done on a flat and
stable surface, with enough space for moving the machine and its pack-
aging, always making use of suitable equipment.
IMPORTANT
The safety systems prevent the engine from starting if the vacuum or blower tubes
are not assembled correctly.
1.1 USE AS A BLOWER (Fig. 1)
–
A
lign the protrusions of the first blower tube
(1) with the air outlet nozzle compartments (2),
then push the tube until it is firmly in place.
–
A
lign the compartment of the second
blower tube (3) with the protrusion (4) of the
first tube, push the tube in and rotate it 90
degrees clockwise to one of the two foreseen
positions, until it is firmly in place.
NOTE
Fit the second tube with a flat or round end depending on the type of work to be
accomplished. To remove the first tube (1), insert the screwdriver included in the kit in the hole (5)
and press firmly until you can slide the tube out from the air outlet nozzle.v
