270LX, 270UX Premium Brushcutter
3
Original Instructions Version November 17
270LX/UX_1011171
Warnings in the Manual
This mark indicates instructions which must be followed in order to prevent accidents which could
lead to serious bodily injury or death.
This mark indicates instructions which must be followed or it leads to mechanical failure,
breakdown, or damage.
This mark indicates hints or useful directions in the use of the product.
IMPORTANT
!
NOTE
Component Location
1
NYLON CUTTING HEAD
Auto bump feed nylon cutting head.
2
DRIVE SHAFT
Contains the drive shaft.
3
THROTTLE TRIGGER
Spring loaded to return to idle when released.
4
IGNITION SWITCH
Slide switch, forward to run, back to stop.
5
SAFETY LEVER
Prevents accidental operation of the throttle.
6
HANDLE
This handle can be adjusted for maximum comfort
7
HARNESS ASSEMBLY
Fully adjustable for maximum comfort
8
PETROL CAP
9
PURGE BULB
Push the purge bulb to remove the air from the fuel system.
10
FUEL TANK
Contains fuel and fuel filter
11
AIR CLEANER
Contains replaceable filter
12
CHOKE
To help in cold starting
13
STARTER HANDLE
Pull to start the engine
14
DEBRIS SHIELD
Helps protect the operator from debris
15
CUT-OFF KNIFE
Cuts the nylon line to the correct length
16
FRONT HANDLE
This handle can be adjusted for maximum comfort
17
GEARBOX
For attaching a blade or nylon head to
18
REAR HANDLE
Incorporating throttle trigger, switch, and safety lever
19
HARNESS FIXING POINT
Fixing point to attach the harness
