Mitox 26B, Operator'S Manual

Page: 22 / 32

26B Blower / 28BV Blower Vacuum
22
Original Instructions Version October 13
Storage
(30 days or longer)
CLEANING Thoroughly clean the machine exterior.
INSPECTION Inspect the entire machine and tubes
for damage, including loose or missing components,
and repair as necessary.
FUEL Drain the fuel tank, and then clear the carburetor and lines by running the
machine until it stops from lack of fuel.
LUBRICATION Remove the spark plug, and then pour approximately 1/4-oz of oil into the cylinder through
the spark plug hole. Before reinstalling the spark plug, pull the recoil starter 2 or 3 times to distribute the oil
over the cylinder walls.
AIR CLEANER Remove, clean, and reinstall the filter element as described under “daily maintenance.”
STORAGE Store the machine in a clean, dry, dust-free environment.
IMPORTANT!
• After every use, check that all nuts, bolts and screws are securely fastened and tighten if
necessary.
•
In the event of an accident, breakdown or blockage, ensure the engine is turned off
before any work is carried out to rectify this.
• Make sure the engine has stopped and is cool before performing any service to the
machine. Contact with moving parts or hot muffler may result in a personal injury.
Always wear heavy-duty gloves when handling the blades.
Transportation
• Never transport the Blow/Vac with the engine running. An engine that is running could be
accidently accelerated causing the implleor to engage.
• Make sure the blade safety guards are in place when transporting the Blow/Vac.
• Ensure the Blow/Vac is secure when transporting in a vehicle and the tank is drained of fuel.