T.38 Fax Transmission
8
NOTE:
The repetition of the final frame will help prevent losing the end of a message, v.21 or end
of page message. Losing the end of packet message can create a major problem in the transmission
since the Redundancy is not use in this situation.
5. Click Apply.
Result:
Allowing Unsecure T.38 with Secure RTP
If you are not familiar with the meaning of the fields, click Show Help, located at the upper right
corner of the Web page, to display field description when mousing over the field name.
NOTE:
This procedure is required only if SRTP is used.
Steps
1. Go to Media > Security.
2. In the Security table, under the RTP section, set the Mode selection list to Secure with fallback.
Summary of Contents for TA7100 Series
Page 1: ...Mitel TA7100 58014903 REV00 STANDARD FAX CONFIGURATION...
Page 17: ......
