T.38 Fax Transmission
7
3. Set the Enable filed to Enable.
4. Click Apply.
Result:
Setting the Redundancy Level
If you are not familiar with the meaning of the fields, click Show Help, located at the upper right
corner of the Web page, to display field description when mousing over the field name..
Steps
1. Go to Media > Codecs.
2. In the Codec section, click
located on the same line as
T.38
.
3. In the
T.38
table, set the
Redundancy Level
.
NOTE:
Using redundancy increases transmission reliability, however the number of redundancy
packets will also increase the bandwidth being used.
4. Set the Frame Redundancy Level.
Summary of Contents for TA7100 Series
Page 1: ...Mitel TA7100 58014903 REV00 STANDARD FAX CONFIGURATION...
Page 17: ......
