Mitel SX-200 ICP - 1.0 5020, Technician'S Handbook

Page: 22 / 360

14
SX-200 ICP CX/CXi Technician’s Handbook
Default Database Configuration
The CDE Forms are factory-set with default values that make it easier and
faster to program the system. The defaults allow you to install the
SX-200 ICP in a square KTS (key telephone system) configuration with up
to 16 IP phones and four analog terminals (phone, fax, or modem) and
make extension-to-extension calls without doing any programming. You
will also be able to receive fax and modem calls, but will have to program
ARS to make external calls from ONS devices.
Alternate databases are provided on the SX-200 ICP software CD and on
the Mitel Online website. For more information, see page 187.
The default database includes the following:
Telephone related
• 3-digit extension numbers that start at extension 100
• Ports on the Controller
- 6 LS CLASS
- 4 ONS (extensions 200 to 203)
• 7 default classes of service (COS 1 – 7). They are for IP Phones, ONS,
Subattendant, Attendant Console, LS/CLASS, Voice Mail, and IP trunks.
(The subattendant COS and Attendant Console COS are used by the
SX-200 ICP MX only.)
• default key programming on the sets for a 6-line square system
• default ring cadences
• all phones assigned to paging group 1
• the handsfree microphone is not automatically turned on when
receiving a page (auto-latched).