Mitel NETVISION PHONE, User Manual, Page: 20 / 30

-14-
Conference
To form a Conference when a two-party call is already in progress, or
to add another party to an existing Conference:
1. Press FCT .
2. Use the scroll keys (*<, >#) or the Vol buttons to select Transfer .
3. Press SND .
4. Dial the number of the next party.
5. Press
SND .
6. After the called party answers, press FCT .
To return to the previous call if the called party is busy or does not
answer, press
FCT , select BacktoHeld , and then press SND .
7. Use the scroll keys (*<, >#) or the Vol buttons to select Conference .
8. Press SND . The conference is established.
To expand a conference to five parties (including yourself):
z
Repeat the above procedure for each additional party.
To exit a Conference:
z
Press END .
Call Re-routing / Message Waiting
If you cannot take a call, or if your NetVision Data Phone is turned off or out
of range, the system will automatically forward your calls to a
preprogrammed destination--typically voice mail.
A flashing Message Waiting light and an "M" on the display indicate that you
have messages waiting.
To retrieve your messages:
1. Press FCT .
2. Use the scroll keys (*<, >#) or the Vol buttons to select RetrieveMsg .
3. Press SND .
4. Proceed as instructed by your voice mail system.