Mitel MiVoice 5361, Quick User Manual

Page: 5 / 24

Forwarding calls
1. Press Foxmenu >
M
ENU
, then
F
ORWARDING
>
S
ELECT
.
2. Select the type of forwarding
1
.
3. Select the destination (user
2
/subscriber
3
).
4. Enter the call number and validate.
Reset call forwarding with Foxmenu >
M
ENU
>
A
CTIVATED
F
EATURES
>
R
ESET
/
D
ELETE
.
Deflecting a Call During the Ringing Phase
1. Press Foxmenu >
D
EFLECT
during the ringing
phase.
2. Enter the call number and press Foxmenu >
OK
2
.
Transferring During a Call
1. Press the Call key or Foxmenu >
E
NQUIRY CALL
,
enter the call number and wait until the called
party answers.
2. Press Foxmenu >
C
ONNECT
, the call is trans-
ferred. If no-one answers, cancel with
E
ND
CALL
2
/
R
ECOVER
3
and take back the first call.
Brokering
Switches between two callers without interrupt-
ing the calls. You are making/taking a call:
1. Press Foxmenu >
E
NQUIRY CALL
, enter the call
number and wait until the call is answered.
2. Press Foxmenu >
B
ROKERING
to switch back
and forth between the callers.
Conference call
Connects several callers for a conference call. You
are making/taking a call:
1. Press Foxmenu >
E
NQUIRY CALL
, enter the call
number and wait until the call is answered.
2. Press Foxmenu >
C
ONFERENCE
.
3. Add other callers using Foxmenu >
E
NQUIRY
CALL
1
.
Leaving a conference call: Press the End key.
Callback
The person is busy or does not answer: Press Fox-
menu >
C
ALLBACK
.
Resetting activated features
You can deactivate again all the call forwardings
and other temporarily active functions: Press
Foxmenu >
M
ENU
>
A
CTIVATED
F
EATURES
>
S
ELECT
and
R
ESET
/
D
ELETE
the function you want.
Installation and Connection
You can set up the phone either at a 40° or a 25°
angle:
1. Insert the footstand as indicated on the instal-
lation diagram until it snaps into place.
2. Plug in the handset and phone cords and feed
them through the cable holders.
Notes
• Some function commands of the vocal an-
nouncements
3
are not to apply on this phone.
• Always install the footstand before you plug in
the cables.
• Always remove the cables before you detach
the footstand.
Connections
Document designation
• Document number: eud-1247_xx / 1.3
• Valid as of: Mitel 5000 R5.1 / MiVoice Office 400
R1.0
• Copyright © 01.2015 Mitel Networks Corporation
You can download all user documents available
for this device (e.g. user guide) at
www.mitel.com.
Connecting to the IP network
(MiVoice 5361 IP only)
Connecting the power supply
(MiVoice 5361 IP only)
Telephone connection
(MiVoice 5361 only)
Connecting the handset