Mitel MiVoice 5000 User Manual Download

Page: 68 / 73

Appendices

Appendices

Menu options

The table below shows the menu tree structure, accessible via the system key

Menu

when

the terminal is

idle

. The available options are used to deploy the functions offered by the

system.

All the functions are described in the table below: Some of them are not accessible from
your terminal. Ask your system operator for advice.

Remarque :

During a call the

Menu

key only gives access to the functions available during

a call.

The last column takes you to the pages on which the function is described in detail.

Call logs

• Missed calls

• Incoming calls

• Outgoing calls

• All

“Call logs”, page 23

Active functions

• Forward

• Do not disturb

• Deactivating a hunt

group

• General deactivation /

global standby

• Alarm

• Callback

Only the active

functions are
displayed.

Forward

• Cancel all forwards

(appears if a
forwarding operation
is active)

• Immediate forward

• Forward on busy

• Forward on no answer

• Predefined forward

“Call forwarding”,
page 27

Summary of Contents for MiVoice 5000










































































Search results

Summary of Contents for MiVoice 5000

Reviews:

Related manuals for MiVoice 5000

Brands by name

Popular brands

Mitel MiVoice 5000, User Manual

Search results

Summary of Contents for MiVoice 5000

Reviews:

Related manuals for MiVoice 5000

Brands by name

Popular brands