Mitel MiVoice 5000 User Manual Download

Page: 34 / 73

Call forwarding

If absent or busy, you can forward your calls

to another terminal, an external number

(GSM number, for instance) or to your voice mailbox

This function can also be programmed through feature codes. They are described in Sec-
tion “Forwarding your calls through feature codes”, page 29.

Forwarding a call

1 - Press the context-sensitive

Menu

key.

2 - Select

Forward

then press

Select

Remarque :

If forwarding has already been programmed, it is

preceded a tick.

Choose the forwarding type.

The following forwarding types are proposed:

•

Immediate forward

the call is immediately forwarded to the

terminal indicated.

•

Forward on busy

the call is forwarded to the terminal

indicated if your terminal is busy (or unavailable).

•

Forward on no answer

: the call is forwarded to the terminal

indicated when you do not answer.

•

Predefined

: the call is forwarded to a terminal whose number is

programmed by the operator.

3 - Select the option you want (

Immediate forward

, for example)

then press

Select

to confirm.

* Selon programmation effectuée par l’exploitant système

Menu

Forward

Immediate forwar

Summary of Contents for MiVoice 5000










































































Search results

Summary of Contents for MiVoice 5000

Reviews:

Related manuals for MiVoice 5000

Brands by name

Popular brands

Mitel MiVoice 5000, User Manual

Search results

Summary of Contents for MiVoice 5000

Reviews:

Related manuals for MiVoice 5000

Brands by name

Popular brands