15
C
ONNECTING
THE
T
ELEPHONY
C
ABLES
C
HAPTER
4
I
NSTALLATION
Connecting the Telephony Cables
NOTE
:
To prevent damage to the EX Controller, make sure to connect the cables to their proper location
on the EX Controller.
1.
Make sure an adequate earth ground connection has been made between the grounding screw on
the back of the EX Controller and an appropriate grounding point in your site.
WARNING
:
Adequate earth grounding connection of the ex controller is mandatory to avoid any
damage or injuries.
2.
Wear an ESD wrist strap, ensuring it makes good contact with your bare skin.
3.
Attach the ESD wrist strap end to an earth ground (unpainted bare metal spot of a grounded equip
-
ment rack).
4.
Make sure the circuit breakers of AC power sources used to power the EX Controller are OFF.
5.
Make sure the provided power cable is connected to the EX Controller and in an appropriate AC elec
-
trical outlet.
6.
Connect faxes, phones or a PBX to the FXS card.
7.
Connect a PBX or ISDN line to the PRI card. See
8.
Connect a PSTN or a PBX to the FXO card.
9.
Connect a PBX line to the BRI card. See
.
Software Installation
MX-ONE
See
MiVoice MX-ONE Optional Installtions
on Mitel Document Center.
MiVoice 5000
See
MiVoice 5000: Installing and Configuring Mitel EX Controller and EX Gateway
on Mitel Document
Center.
Summary of Contents for MiVoice 5000
Page 1: ...EX Installation Guide MiVoice MX ONE and MiVoice 5000 March 13 2020 ...
Page 27: ......
Page 28: ......