manualshive.com logo in svg

Mitel DBC 42, User Manual

Share
Download
Mitel DBC 42 User Manual Download Page 66

6/1553-ANF 901 54 Uen S2 2016-03-08

66

C

ALL

 F

ORWARDING

3)

Enter your own extension number.

4)

Press the 

OK

  (F4) key. The Follow-me lamp is turned on.

Using a procedure

1)

Lift the handset (dial tone).

2)

Dial 

*21* own extension number #

 . The Follow-me lamp and special dial tone 

are turned on.

3)

Replace the handset.

The follow-me key is used for indication if Follow-me is activated.

To order follow-me from another telephone:

Using the Absence soft key

1)

Press 

Absence

  (F2).

2)

Select the 

Follow-me

  menu.

3)

Enter 

your own extension number*the extension number of the new answering 

position

.

4)

Press the 

OK

  (F4) key.

Using a procedure

1)

Lift the handset (dial tone).

2)

Dial 

*21* own extension number * the extension number of the new answering 

position#

  (special dial tone).

3)

Replace the handset.

6.2.4 CANCELING 

FOLLOW-ME FROM ANOTHER PHONE

1)

Lift the handset (dial tone).

2)

Dial 

#21* own extension number#

  (dial tone).

3)

Replace the handset.

6.2.5 ORDERING 

FOLLOW-ME REMOTELY

With this feature you can order follow-me of any extension number from any telephone. 

The prerequisite is that all the involved telephones have the right service profile. 

To order remote programming of follow-me, do the following: 

1.

Lift the handset and wait for dial tone.

2.

Dial 

*21*extension number to divert * extension number of the new answering 

position#.

3.

Wait for special dial tone.

4.

Replace the handset.

6.2.6 CANCELING 

FOLLOW-ME 

REMOTELY

To cancel remote programming of follow-me from another telephone than the tele-
phone with the diverted number:

Summary of Contents for DBC 42




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands