32/1531-ANF 901 43 Uen B2 2016-04-01
Installation Guide
Base Station
12
Software
The software in the BS3x2 can be updated by downloading new software without
disconnecting the equipment.
Connectors
•
Two 8-pin RJ45 modular jacks for data and powering
LEDs
The BS3x2 has one RGB LED to indicate status. This section describes the different
indications and when they shall be used. In the illustrations below: Each blink pattern is
represented by a number of blocks where each block is 100 ms. Light grey blocks
means that the LED is off. Whenever the indication is changed the new pattern always
starts from the first block.
Idle/OK
Solid blue.
BS3x2 operational and no
traffic on the BS3x2.
Starting up
100 ms blue, 100 ms off.
The BS3x2 is in start-up
phase, i.e. waiting to be
initialized by the PBX.
Active traffic
400 ms off, 2000 ms blue.
BS3x2 operational and
traffic on the BS3x2.
Fully occupied
for speech traffic
400 ms red, 2000 ms blue.
Fully occupied with traffic.
Software
download
400 ms blue, 600 ms off.
Download of firmware in
progress.
Error
100 ms red, 100 ms off.
U
PN
layer 1 communication
error.