Mitel 6863i SIP Phone Installation Guide
9
INSTALLATION
DESK INSTALLATION
For desk installation of the 6863i IP Phone a reversible stand is included that attaches to the
back of the phone above the various ports. Two viewing angles (35° low angle and 55° high
angle) are available allowing users to personalize their phone viewing preference.
1.
Locate the stand insertion area on the back of the phone (above the various ports).
2.
Carefully insert the stand into the insertion area and slide the stand towards the right until
it snaps in place.
Note:
The orientation of the stand determines the viewing angle. If the bottom of
the stand is installed facing the top of the phone the viewing angle will be 35°. If the
bottom of the stand is installed facing the bottom of the phone the viewing angle
will be 55°.
j
35°
55°
OR
