Mitel 6800 Series Wall Mount Kit Installation Guide
10
The orientation of the Wall Mount Base determines the viewing angle of the phone. Use
the degree markings on the Wall Mount Base to select the viewing angle, overlay the Wall
Mount Base on top of the telco wall plate with the desired angle facing up, and pull down
to secure the Wall Mount Base in place.
7.
On the back of your phone, connect the provided Ethernet cable into the network port
marked with
. Plug the other end of the Ethernet cable directly into the network jack on
the wall.
Notes:
1.
The 6869i IP Phone supports only the 20° viewing angle.
2.
The 6863i, 6865i, and 6867i IP Phones support both 10° and 20° viewing angles.
3.
If necessary, tighten the screws to firmly lock the Wall Mount Base in place.
Wall Mount Base Secured
to Telco Wall Plate
Overlay and Pull Down
Telco
Wall
Plate
or
