Mitel 5560 IPT User Guide
End a call
•
To end a call and free the line, press the
Release
button on the side that received the call.
Switch between two active calls
•
Press
Left
or
Right
accordingly. After switching from Left to Right, the caller on the Left is
maintained but cannot hear your conversation with the caller on the Right.
•
If the call being switched to is in Handsfree mode, switch to it by pressing
Left
or
Right
(to
associate the Microphone key to the correct call), then
Microphone
to enable microphone
if necessary. See
Handsfree Operation
on page 25.
Redial
To redial the last number that you manually dialed:
•
Press the key you have programmed as
Redial
.
Redial - Saved Number
To save the last number that you manually dialed:
1. Press
Left
or
Right
to select the handset/headset you want to use.
2. Dial the appropriate feature access code.
To redial a saved number:
1. Press
Left
or
Right
to select the handset/headset you want to use .
2. Dial the appropriate feature access code.
Note
: The left and right sides of the terminal have separate redial memories. For example, if you
dial a number using the right handset and then switch to the left handset, you cannot save
the right-dialed number on the left handset.
Handsfree Operation
The
Speaker
fixed function key turns Handsfree on and off. You can have one active call on the
speaker at one time. You can also have an active handset or headset call on the other audio path
simultaneously.
To use Handsfree to make a call:
1. Press
Left
or
Right
to select the handset you want to use.
2. Press your Prime Line key or any Line Appearance key.
Note
: Your administrator must
program Line Appearances.
3. Dial the number.
4. Press
Speaker
.
5. To speak when the called party answers, do one of the following:
•
Press and immediately release
Microphone
to turn the microphone on continuously
•
Press and hold
Microphone
to use the push-to-talk Microphone feature.
6. To switch between two active calls, see
Switch between two active calls
on page 25.
25