SUPER Series · User’s Manual
- 13 -
ATTENTION
1. Environment
1.1 The machine can perform in environment with dry air of a dampness proportion of
max 90%.
1.2 Ambient temperature should be between -10
°
C to 40
°
C.
1.3 Avoid welding in sunshine or drippings.
1.4 Please do not use the machine in the air which is polluted with conductive dust or
corrosiveness gas.
2. Safety points
The welding machine has adopted protection circuit to avoid broken under over
voltage, over current and overheat. When voltage, output current and temperature of
machine exceed the standard level, the unit will stop working automatically. In order
to avoid the damage to the unit, operator must pay attention to the following:
2.1 Please make sure the working area is adequately ventilated!
The machine adopts air cooling, so be sure the intake is not in block or covered. It
should be more than 0.3 meter from welding machine to the surroundings. And
good ventilation is important for better performance and the longevity of the unit.
2.2 No over load!
Please avoid overload using as it will shorten the machine life.
Normally it's overload if the OC led is on during welding process, so please stop
welding immediately and continue to work after OC led is off.
2.3 No over voltage
Automatic compensation circuit of voltage will assure that welding current is kept in
allowable arrangement. If power voltage exceeds the limitation, it will damage the
welder. In that case, please take relevant preventive measures.
2.4 Assure the ground screw is well connected
There is a ground screw with the symbol at the rear panel of the unit. Choose
section of inducting cable over 6mm
2
and reliably grounding to prevent from static
electricity and leaking.
SUPER Series · User’s Manual
- 2 -
SECURITY CAUTION
Please make good protection as there will be possibility of harm during arc
welding process. For more details please refer to the Operator Safety Guide,
which complies with the preventive requirements of the manufacturer.
Electric shock-----may be fatal
Install the earth cable according to the standard
No touching electric parts with bare or wet hands or wet clothes
Make sure that the working piece and you are in under insulation
circumstances
Make sure that your working is in safe condition
Smoke-----may be harmful
Keep your head out of the smoke
Make sure the air is flowing to avoid breathing in the smoke in welding
process
Arc radiation-----may be harmful to your eyes and skin
Wear suitable welding mask and clothes to protect your eyes and skin
Use suitable screen or curtain to keep the onlookers away from the emission
Fire
Welding sparks may cause fire, make sure that welder is close to non-
flammable material
Noise----excessive noise may be harmful to your hearing
Please wear something to protect your ears from the noises
Warn the onlookers hidden harm may be caused by the noise
Break-down: ask the professional for help
If you have any problems in setting up or operating, please turn to this manual
first.
If you still can not understand after reading this manual, please contact your
supplier or manufacturer to get professional assistance.
