9
mvip@mitech-ndt.com
Note: If a specific menu item is disabled (appears in a different color), the high light cursor will
skip that item while navigating.
4.1 Test settings
Press arrow keys or F2 key to navigate up and down to
highlight the desired item.
Press
or F3 key to change the setting or open the
setting dialog.
Press
or F1 key to return to the main menu.
Preselected parameters of test setting:
˗
Impact device – Automatically identified.
˗
Impact direction – Automatically detected and corrected.
˗
Material – Steel and cast steel
˗
Hardness scale – HLD (if available for connected impact device type)
˗
Average times – three
4.1.1 Impact device setting
The impact device setting can be fixed to a specific type of impact device depending on the one
connected to the main unit. As an alternative, AUTO item can also be selected to identify the type of the
impact device automatically.
Press arrow keys or F2 key to navigate up and down to
highlight the desired item.
Press
or F3 key to confirm the selection.
Press
key to cancel the change and close current
dialog box.
Make sure the selected or the automatically identified impacted device agrees with the connected one.
