Page 11
© Mitchell & Johnson UK 2012 SAP201V IB Ver 1.0 Rev 0.0
5.
Set Up and Connection to Other Devices
This amplifier is designed to be connected to speakers for audio playback and other audio source devices such as a CD player
or tuner. There are two ways of connecting: analog and digital. You may use either depending on the capability of the device
you wish to connect.
Correct Connection of Analog RCA Audio Cables
-
Pay attention to the plug colours and the left and right channels when connecting RCA audio cables.
-
Ensure a good connection by making sure to insert plugs completely. Failure to insert fully can cause noise or
malfunctions.
-
To prevent unwanted interference keep audio cables as far apart from power cables as possible.
Correct Connection of Digital Cables
-
There are two types of digital audio connection terminals
o
OPTICAL
and
o
COAXIAL
-
Follow the instructions for the device you wish to connect to ensure the correct cable is used.
