
Safety and Compliance Information
Before installing and using TYANGT62F-B8026, take note of the
following precautions:
·
Read all instructions carefully.
·
Do not place the unit on an unstable surface, cart, or stand.
·
Do not block the slots and opening on the unit, which are provided for
ventilation.
·
Only use the power source indicated on the marking label. If you are
not sure, contact the power company.
·
The unit uses a three-wire ground cable, which is equipped with a third
pin to ground the unit and prevent electric shock. Do not defeat the
purpose of this pin. If your outlet does not support this kind of plug,
contact your electrician to replace your obsolete outlet.
·
Do not place anything on the power cord. Place the power cord where
it will not be in the way of foot traffic.
·
Follow all warnings and cautions in this manual and on the unit case.
·
Do not push objects in the ventilation slots as they may touch high
voltage components and result in shock and damage to the
components.
·
When replacing parts, ensure that you use parts specified by the
manufacturer.
·
When service or repairs have been done, perform routine safety
checks to verify that the system is operating correctly.
·
Avoid using the system near water, in direct sunlight, or near a heating
device.
·
Cover the unit when not in use.
Summary of Contents for TYAN B8026G62FE10HR
