MiTAC Maestro 4070 User Manual Download

Page: 28 / 64

Field Name

BIOS Vender

Default Value

American Megatrends

Comment

This field is not selectable. There is no help text associated with it.

Field Name

Core Version

Default Value

5.17

Comment

This field is not selectable. There is no help text associated with it.

Field Name

Compliancy

Default Value

UEFI 2.7 ; PI 1.6

Comment

This field is not selectable. There is no help text associated with it.

Field Name

BIOS Version

Default Value

Display the version of the BIOS

Comment

This field is not selectable. There is no help text associated with it.

Field Name

Build Date

Default Value

Display build date of the BIOS

Comment

This field is not selectable. There is no help text associated with it.

Field Name

ME FW Version

Value

ME Firmware Version.

Comment

This field is not selectable. There is no help text associated with it.

Field Name

Processor Information

Value

Display the installed CPU brand.

Comment

This field is not selectable. There is no help text associated with it.

Summary of Contents for Maestro 4070

































































Search results

Summary of Contents for Maestro 4070

Reviews:

Related manuals for Maestro 4070

Brands by name

Popular brands

MiTAC Maestro 4070, User Manual

Search results

Summary of Contents for Maestro 4070

Reviews:

Related manuals for Maestro 4070

Brands by name

Popular brands