77
8175 N/B MAINTENANCE
8175 N/B MAINTENANCE
Special Events:
-Cover switch, or called lid could trigger an event to LCD panel off, Standby(S1/S2), or
Suspend(S3/S4). The exact state triggered is selected in SCU
-Power button is also a resume event for all power saving mode except the Idle state
-When battery capacity is low under 10% while AC is not plug-in, system will begin to
alert via PC speaker. User could also press Fn+F10 to disable/enable the warning beep.
Once the battery capacity is critically under 3%, system BIOS will try to force the whole
system into the STD state.
Resume Event:
Standby -Resume when keyboard/trackpad/PS2 devices have activities, when ring come in on
internal modem or PCMCIA card, or when COM has activities if user select to resume
from COM port
Suspend -Same as resume events for Standby state
Save to Disk -Resume when User push power button
Enter conditions:
-
The timers for Standby and Suspend mode when APM engaged are also applied to this
situation that no APM or ACPI engaged.
Note:
When Save to Disk partition isn’t made on disk, BIOS will choose Save to RAM instead of Save
to Disk
Save to Disk -Same as S4 above
