Load Setup Defaults
The Setup default values have been set to assumedly provide maximum
performance for the system.
If you select “Load Setup Defaults” from the main menu, Setup default values will
be loaded to the option setup menus such as
BIOS Features Setup
,
Chipset
Features Setup
,
Power Management Setup
,
PnP/PCI Configuration
, and
Integrated Peripherals
menus. Your system has been set to Setup default
values at the factory.
Integrated Peripherals
When the “Integrated Peripherals” category is selected from the main menu, the
sub-menu appears as shown below. This category allows you to configure the
on-board device controllers.
IDE HDD Block Mode : Enabled
IDE Primary Master PIO : Auto
IDE Primary Slave PIO : Auto
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO : Auto
IDE Primary Master UDMA : Auto
IDE Primary Slave UDMA : Auto
IDE Secondary Master UDMA: Auto
IDE Secondary Slave UDMA : Auto
On-Chip Primary PCI IDE: Enabled
On-Chip Secondary PCI IDE: Enabled
USB Keyboard Support : Disabled
Init AGP Display First : Disabled
Onboard FDC Controller : Enabled
Onboard Serial Port 1 : 3F8/IRQ4
Onboard Parallel Port : 378/IRQ7
Parallel Port Mode : ECP+EPP1.9
ECP Mode Use DMA : 3
ESC : Quit
¯®¬
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Figure 5-7. Integrated Peripherals Setup Menu
The followings describe in sequence all the items of this category.
IDE HDD Block Mode
This allows your hard disk controller to use the fast block mode to transfer data
to and from your hard disk drive.
The available options are
Enabled
and
Disabled
.
5-18
The SETUP Program
