5
5. You can now attached the fan head
assembly, first completing the power cord
connection to fan head by plugging in
the female connector protruding from the
tube to male connector extending from the
fan head and securing together with the
screw nut of the male connector by turning
clockwise as depicted in Fig. 5, 6 and 7.
Note: As the fan head is relatively heavy,
the easiest way to make the power cable
connection and mount the fan head to
post is to continue to leave base assembly
laying down, rather than standing it upright
at this stage. Standing upright to make the
power cable connection and mounting
the fan head would require 2 people to
complete the same process.
Fig.5
Fig.6
Fig.7
6. Place the fan head mounting post onto the
base assembly and align holes on mounting
post with holes on the upper tube of the base
assembly.
If too much of the power cable is protruding,
simply pull on the power cord section exiting
from the baseplate and than straighten cable
through the cord grip .
You can secure the fan head to the base
assembly upper tube with using the two
screws provided, as shown in Fig.8
At completion you can stand the entire fan
assembly upright.
Note: The fan head comes pre-assembled
with fan blade and grilles all in place, so
no assembly or dis-assembly required.
Just mount direct to the base assembly.
Fig.8
Note: The fan Head is heavy, if adopting
the method of fitting the fan head with the
base assembly in the upright position, this
can only safely be done with the help of
another person.
Note: The cord grip on the base plate does
not act to fully tighten the cord so it cannot
move, it acts as guide channel only,
allowing for cord length adjustment when
fitting fan head. (Ref. Fig.9)
