5
Tips:
Because the mist fan is heavy, so when
assembling, it may require additional people to
assist.
Carefully remove the Mist fan & accessories from
the plasticbag and carton. And taking out the
mist fan, please handle with care in order to avoid
the damage of product.
Place the Mist fan & accessories on a soft cloth or
carpet (To avoid causing any damage
during assembly of the support tube).
Step 1: Assembling cart
1. Fit rear wheels to the cart
Insert plastic washer(12 MM Dia.) and axle
onto to the round tube on either side of the
cart, position the wheels on the axles and
secure wheels with M12 Washer and M12 nuts.
2. Fit 2 casters to the front of the cart.
Use 4 M6 and M6 Screws for each caster and
tighten to secure.
3. Fit the pillar to the cart base and secure with 4
M6 x 20mm screws.
Step 2: Install fan head mounting post
Loosen post retention knob (A) on the pillar,
insert Stainless Steel tube(B) and switch control
box into pillar and fasten with retention knob to
secure in place.
Fig2
Step 3: Mounting fan motor assembly
Unscrew the 3 screws on the motor support collar
and position the fan motor assembly onto the
post protruding from the switch control box and
tighten the 3 screws to secure the fan motor
assembly (see Fig.3)
Fig3
Step 4: Fitting the rear safety grille.
Unscrew and remove the 4 grille retaining screws
from the fan motor head assembly.
Position the rear safety grille on the fan motor
head and align the holes on the grille with screw
holes on the fan motor head and secure the grille
with the 4 screws.( See Fig.4)
Fig4
Step 5: Fitting the fan blade
Position the blade onto the motor shaft and
secure by tightening the blade retention screw.
(see Fig. 5)
Fig5
