�����������
���������
30
• Buckle the front panel to the main unit, pay attention to the correct
direction of front panel. Two of the buckles hook inside, the other two
hook outside.
• Connect the three connectors of front panel to the main unit, allowing
the two fan motors and remote control indicating board on the front
panel to connect to the control PCB of main unit.
• As shown in the diagram to the right, lift the front panel by turning the
screws of the 4 corners until it fi ts snugly to the ceiling board.
Restrict the sponge between the front panel and indoor unit to
5-8mm, Allowing each side of the unit fi t well with the front panel to
avoid airfl ow leaks.
• Adjust the tightness between the front panel and the main unit by
turning the screws clockwise or anti-clockwise.
• If necessary use a socket wrench to adjust the height and level of the
indoor unit (as in diagram) , ensure that the main unit and front panel, and
the front panel and ceiling board are a snug fi t.
• Reinstall the air inlet grill and 4 corner panels back to the front panel.
