Timer-setting
Setting a switch-on
timer when the
appliance is off.
Setting a switch-off timer
during operation.
I FEEL
HI
h
LOW
�
�
�
FAN
ON/OFF
TEMP
SLEEP
SWING
MODE
CAN
SET
TIMER
11
Timer operation mode
The timer can be set with the “TIMER” button to switch on the unit when unattended, allowing you to enjoy
a pleasant environment upon your arrival. You can also set the timer to turn off the unit at night.
The LCD displays the remaining time.
The previous set time is stored and the next set time begins with
the previous one.
Timer ON & OFF cannot be set at the same time.
The time taken to pre-heat/cool a room will depend on the size of
the room.
The TIMER indicator on the front panel lights up when the timer is
in use and turns off when the session is cancelled or fi nished.
������������������������������������������
I FEEL
I FEEL
I FEEL
HI
HI
HI
h
h
LOW
LOW
LOW
Press the TIMER button, "h" flashes on the LCD, then you can set the timer.
Each time the button is pressed, the set time increases by half an hour within 10 hours;
increases by one hour beyond 10 hours.
The timer range can be set is 0.5 hour to 24 hours.
Set the operating mode, temperature and indoor fan speed first, then
press the "TIMER" button until "9.5h" appears.
Point the remote controller at the signal receiving section of the indoor unit,
press the "SET" button when the letter "h" flashes.
A "beep" can be heard:
Timer indicator on the indoor unit lights up.
Letter "h" stops flashing.
To cancel the set timer: press the "CAN" button, a "beep" can be heard
and the timer indicator on the indoor unit turns off.
�
�
3
�
