All drying programmes end with a 5 or 10 minutes cooling phase.If the laundry is not removed
at the end of the cycle,the dryer performs an anti-creasing phase(duration:30 minutes maximum).
If you do not remove the laundry,the dryer will stop automatically at the end of the anti-creasing
phase.The display light “Filter” shows.Turn the program selector dial to “ off ”,all lights go out.
Theremostat reset
If during operation, the heating element doesn’t work.maybe
the manual theremostat disconnect,first turn the programme
selector dial to position “Air Dry” and press the start button,
approximately 20 minutes later,press the theremostat reset button.
theremostat reset button
Clean
the
filter
.
Important!
If the drying programme has to be stopped before it reaches the end,we recommend that you turn
the programme selector dial to position “Air Dry” and wait until the end of this cooling phase
before removing the laundry.This will avoid a build-up of heat inside the appliance.To do this first
turn the dial to “ off ” and then to “Air dry” and depress the “Start” button.
Modifying the programme
To change a programme which is running,first cancel it by turning the programme selector dial to
“ off ”.Select the new programme and press the Start button.
Close pillowcases and covers with fasteners to prevent small laundry items getting tangled inside
them.Close press studs,zips and hooks and tie belts and apron strings.Sort laundry according to
type and degree of drying required.
Do not over-dry laundry,this avoids creasing and saves energy.
Avoid drying dark clothes with light coloured fluffy items such as towels as they could attract the fluff.
The laundry must be thoroughly spun before tumble drying.
Close pillowcases and covers with fasteners to prevent small laundry items getting tangled inside
them.Close press stus,zips and hooks and tie belts and apron strings.Sort laundry according to
type and degree of drying required.
Easy-care items,too,e.g.shirts,should be briefly pre-spun before drying.
Knitted textiles(knitted underwear) may shringk a little during drying.Please do not over-dry items
of this type.It is advisable to allow for shrinkage when choosing the size of new purchases.
You can also put starched items into your dryer.However,to achieve the desired starched effect,
choose the programme “Iron dry”.To remove any starch residues,wipe out the internal drum after
drying with a moist cloth and then rub it dry.
To avoid a static charge when drying is completed,use either a fabric softener when you are
washing the laundry or a fabric conditioner specifically for tumble dryers.
CLOTHES WHICH ARE DRIPPING WET SHOULD NOT BE PLACED IN THE DRYER, ENSURE THAT THESE ARE
SPUN BY WASHING MACHINE SPIN CYCLE OR HAND WRUNG TO REMOVE ANY EXCESS WATER PRIOR TO
PLACING IN DRYER.
THE LINT MUST NOT BE ALLOWED TO ACCUMULATE AROUND THE TUMBLE DRYER OR BUILT UP IN THE
LINT FILTER, REGULARLY CHECK AND CLEAN TO AVOID ANY FIRE HAZARD.
