Section 3
Setting Up the Unit
• SET-UP Menu, WND
• Set max wind speed
• Verify ALT value is 0
j.
Set Max Wind
Speed (wind
sensor required)
• CYCLES Menu.
• 2 – 3 scheduled mists of 30 – 60
seconds in duration is common.
• See Section 5, Managing
Insecticide for field standard
frequency, duration and mist times.
• Blinking C# identifies each
automatic mist cycle with current
mist duration and mist time. Limit
is 24 cycles per day.
• Set mist duration and time (note
AM/PM) for each desired
scheduled mist.
a.
Set AUTO
MIST Cycles
7.
Set Misting Schedule
• If you don’t want to schedule mists
for every day.
• CUSTOM PGM Menu.
• Set selected days to ON or OFF.
• System Mode must be set to
AUTO Custom.
b. Set AUTO MIST
Days
8.
Partially fill drum
and Set Level
• SET-UP Menu, SEN
• If sensor installed, ON. Otherwise,
set to OFF.
i.
Establish
optional Wind
Sensor
• Fill drum 1/2 full through large bung
with water only
• MAINTENANCE Menu, LEVEL
• Press green
►
button and use
arrows to set level to full (8 bars)
Section 3
Setting Up the Unit
• Set Day and Time. (note AM and
PM)
• Exit by pressing Menu button.
a.
Set Day and
Time
•
SET-UP Menu, AGT
•
Set duration of agitation prior to
programmed mists
•
Set time of once daily off-cycle
agitation
f.
Set Independent
Agitation Time
and duration (if
“with Agitator”
Unit)
6.
Program System Setup (systems without zone kit)*
• SET-UP Menu, REM
• Set duration in seconds.
b. Set REMOTE
MIST Duration
• SET-UP Menu, MAN
• Set duration in seconds.
d. Set MANUAL
MIST Duration
• SET-UP Menu, TNK
• Set Tank size in gallons (5 – 995)
h. Set tank size
• Set dip switches in remote
transmitter. (See Section 4, Using
the Remote)
• SET-UP Menu, LRN
• Depress Green
►
button 5 secs,
until LRN On and countdown
starts.
• Depress Remote Transmitter
button until DONE is displayed.
c.
Orient Remote
Transmitter
• SET-UP Menu, NOZ
e.
Set # of nozzles
g. Set Remote
Agitation
duration
•
SET-UP Menu, RAG
•
Set duration of agitation prior to
remote mists
* For systems with zone kit installed, refer to system setup
instructions included with zone kit hardware.
