Revision 1.00 beta – April 2019
14
DOWN PLY - Short press changes frequency to the next lower band in VFO and
to the next lower memory location in memory mode; Long press starts CW
memory play.
FST SCAN – Short press toggles between steps 1Hz-10Hz-100Hz-1kHz. FST icon
lights up when 100Hz and 1kHz steps are selected; Long press activated
VFO/MEMORY scanning. SCAN icon lights up on LCD (function does not work
with firmware ver. 1.XXb)
NB LEVEL – Noise blanker control. Short press toggles NB on/off. Long press
adjust blank parameters
FLT – Short press toggles optional filter on/off
RIT/XIT CL – Short press toggles RIT-XIT-RIT XIT-off and quits without saving
when in menu. Long press clears RIT/XIT offset.
AGC OFF – Short press toggles AGC decay time and off. Relevant icons on LCD
are lit. Long press disengage receiver AGC
ENT LOCK – Short press enters in direct frequency entry mode. Long press locks
frequency changes with main encoder
5.8. ENCODER functions and buttons
Encoder 1 – Power control
Adjusts power, filter bandwith, compression level
Button short press toggles between power and bandwith.
Button long press toggles between pwr/bandwith and compression level.
Fig.7
Encoder 2 KEY/MIC MONI controls
Keyer speed control when in CW mode – default (5-45WPM)
MIC gain control when in phone modes – default
