SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD.
WWW.MISENSECOM.COM
Page 7/16
2.3
Uplink SFP installation
The uplink port of the board is SFP interface, the default
option of the board before leaving the factory is no SFP
module, users could use proper SFP module according to his
own situations.
SFP is standard parts, when you install it, directly inserting
it to the SFP slot of the board. The board could identify that the
module which the user insert is optical module or electrical
module.
In default conditions, the board works in the normal
exchange mode, in that mode, the 2 SFP interfaces of board are
same, and the uer could use any one of it. But in isolation and
converge mode, user should choose the specific port
In isolation mode, the corresponding relations of up link
ports and PON ports are as follows:
SFP uplink port
PON port
GE1 PON1
GE2 PON2
Table 2 the corresponding table of ports
