2
11/30/15 REV.A
3
2
1
4
1
3
2
1
4
3
2
1
3
4
2
Standard Installation
Shut off water supplies.
(If installing the faucet with the escutcheon, begin with step 2.)
Insert faucet body through the hole in sink. Install plastic washer
(1) and metal washer (2) onto the threaded mounting shank.
Thread nut (3) onto mounting shank. Lock nut into position by
tightening screws (4). Do not overtighten.
Please continue to Step 4.
Optional Escutcheon Installation
Shut off water supplies.
(If installing the faucet without the escutcheon, begin with step 1.)
Screw the bolts (1) into the escutcheon (2) and ensure that the
base plate (3) is pressed onto the escutcheon (2) before the
escutcheon (2) is installed over the three holes in the sink. From
underneath sink, hand tighten the mounting nuts (4). Do not
overtighten.
Note: If the sink surface is uneven or irregular, plumber’s putty or
a silicone sealant may be used to create a watertight seal.
Plumber’s putty may have an adverse reaction with plastic
gaskets under the spout base so if your faucet has a plastic
gasket, use a high quality silicone sealant. Plumber’s putty also
may have an adverse reaction with some cultured marble or
natural stone. In these cases a high quality silicone sealant is
recommended.
Optional Escutcheon Installation (2)
Insert faucet body through the hole in escutcheon.
Install plastic washer (1) and metal washer (2) onto the threaded
mounting shank. Thread nut (3) onto mounting shank. Lock nut
into position by tightening screws (4). Do not overtighten.
