Miscea Remote Control, Instruction Manual

Page: 17 / 48

V 19.01
17
English
4. Public-User Mode
4.2 Disable the Public-user Mode
Press the buttons indicated in the below listed order. «LIQUID 2» button, «-» button,
«SAVE» button.
4.3 Change the short water cycle delay time
The short water cycle delay time refers to the waiting state the faucet is in after the
soap has been dispensed, to give the user an opportunity to lather soap on their hands
without the water flushing the soap away immediately.
While in Public-user Mode, press «MEMO» button on the remote control. The water
sector will light up. With the «+» and «-» buttons, the delay time can be changed. To
save settings, press «SAVE» button. All colored LED lights illuminate to indicate new
setting has been saved. If «SAVE» button is not pressed within 10 seconds of last
selection, previously saved setting will be stored.
There are 9 settings available. Each setting is indicated with a different beep tone.
4.4 Change the duration of water flow in short water cycle
The short water cycle is intended to make obvious to the user that the water sector is
now activated and allows the user to wet their hands. During the short water cycle, the
water sector will light up, and a small amount of water will be automatically dispensed
for a specified amount of time. This water flow time can be changed.
While in Public-user Mode, press «TEMP» button on the remote control. The water
sector will light up. With the «+» and «-» buttons, the water flow time can be changed.
To save settings, press «SAVE» button. All colored LED lights illuminate to indicate
new setting has been saved. If «SAVE» button is not pressed within 10 seconds of last
selection, previously saved setting will be stored.
There are 9 settings available. Each setting is indicated with a different been tone.
LIQUID 2
-
TEMP
MEMO