3/16" Drill Bit
Tools Required
Level
Tape Measure
Electric Drill
Caulking Gun
Hole Saw
Materials Required
Mildew Resistant
Silicone Caulking
Drywall Screws
Min 40 Pcs
Shims
CAUTION:
To cut plumbing fixture openings on the tub shower unit:
Ÿ
Use correct Hole Saw based on selected fixture design.
Ÿ
Cut from the finished side of the unit.
Ÿ
Use masking tape to cover the surrounding surface to prevent scratches and other damage.
Shimming May Be Required
Ÿ
Shims may be required to level the tub for adequate
drainage.
3
TSH51L/R & TST53L/R
INSTALLATION INSTRUCTIONS AND OWNER’S MANUAL
READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION
PLEASE RECORD THE SERIAL NUMBER _________ OF YOUR TUB SHOWER
SAVE THIS MANUAL FOR FUTURE REFERENCE
Important:
The Acrylic Tub Shower was carefully inspected and packed for shipment. Ensure the unit is free of any
damage, and if any issues are found do not proceed with the install and contact Mirolin. The warranty does not cover
damages or defects in the finish once the unit has been installed. Protect the tub shower from dirt and damage by leaving
the polyethylene protective film in place until installation and other related construction is complete.
Consult Local Plumbing and Building Codes Prior to Installation.
Framing
Note: Do not build the surrounding structure before receiving your unit. Structure measurements should be verified
against the unit to ensure a proper fit.
88 ¼
"
2242 mm
60 ¼"
1530 mm
18"
457 mm
A
1 Piece Tub Shower 3 Piece Tub Shower
31 ½" 800 mm
32 ½" 826 mm
A
8 ⅜"
213 mm
1 pc. HAMPTON
3 pc. TRIBECA