M
ENU
D
ESCRIPTIONS
L
ANGUAGE
To choose language used in the menus and control screens.
S
CALING
M
ODE
To adjust the input signal to the screen size by using the following options:
- Fill All: To adjust the signal to the full screen.
- Fill Aspect Ratio:
To adjust the horizontal signal to full screen but
maintain the original vertical signal.
This function only works when the resolution setting is lower than the
native resolution of 1280 x 1024.
C1 (6500°K)
Default color Temperature setting: Adjust the color temperature to 6500°K
x = 0.313, y = 0.329
C2 (7800°K)
Default color Temperature setting: Adjust the color temperature to 7800°K
x = 0.296, y = 0.311
R
ED
Individual adjustments for red. Adjusts the intensity of red.
G
REEN
Individual adjustments for green. Adjusts the intensity of green.
B
LUE
Individual adjustments for blue. Adjusts the intensity of blue.
R
ESET
To set all the adjustments to factory default values.
E
XIT
To save user adjustments and exit OSD menu.
10
11
C1
C2
P
OWER
M
ANAGEMENT
The power management feature of this monitor is comprised of two
stages: On or Out Of Range (Green), OFF (Amber).
Power Mode
H-Sync
V-Sync
Video
LED Color
Normal
Pulse
Pulse
Active
Green
Out Of Range
Pulse
Pulse
Active
Green
Off
Pulse
No pulse
Blanked
Amber.
Off
No pulse
Pulse
Blanked
Amber
Off
No pulse
No pulse
Blanked
Amber
This monitor meets the Green Monitor standards as set by the Video
Electronics Standards Association (VESA). This feature is designed to
conserve electrical energy by reducing power consumption when there is
no video input signal present. When there is no video input signal this
monitor, following a time-out period, will automatically switch to an OFF
mode. This reduces the monitor's internal power supply consumption.
After the video input signal is restored, full power is restored and the
display is automatically redrawn. The appearance is similar to a
"Screen Saver" feature except the display is completely off. The display
is restored by pressing a key on the keyboard, or clicking the mouse.
P
LUG &
P
LAY
This monitor is equipped with VESA DDC1/2B capabilities according to
the VESA DDC STANDARD. It allows the monitor to inform the host
system of its identity and, depending on the level of DDC used,
communicate additional information about its display capabilities. The
communication channel is defined in two levels, DDC1 and DDC2B.
The DDC1 is a unidirectional data channel from the display to the host
that continuously transmits EDID information. The DDC2B is a
bidirectional data channel based on the I²C protocol. The host can request
EDID information over the DDC2B channel.
NOTE:
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS
NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPE-
RATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.
