MIRKA PBS 10NV, Operating Instructions Manual

Page: 44 / 164

44
Mirka® Pneumatic Belt Sander • PBS 10NV & PBS 13NV
en
• Do not overreach . Keep proper footing and balance at all times .
• Do not wear loose clothing or jewellery . Keep your hair, clothing and gloves away from moving parts . Loose clothes,
jewellery or long hair can be caught in moving parts .
• If any physical hand/wrist discomfort is experienced, stop working and seek medical attention . Hand, wrist and arm
injury may result from repetitive work, motion and overexposure to vibrations .
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust .
• The tool is not electrically insulated . Check work area for live electricity, gas pipes, etc . before operation .
CAUTION
• Prevent unintentional starting .
• Keep work area clean and well lit .
• Always ensure that the work piece to be sanded is firmly fixed .
• Before changing abrasive always disconnect the air supply .
Additional safety warnings
• Read all instructions before using this tool . All operators must be fully trained in usage and safety of this tool .
• All maintenance must be carried out by trained personnel . For service, contact Mirka authorized service centre!
• Always wear required safety equipment (see warnings) .
• The operator must be in a secure position and have a firm grip and footing on a solid floor .
• Check tool, hose and fittings regularly for wear .
• Always take care to ensure your safety at work; never carry, store or leave the tool unattended with the air supply
connected .
• Do not exceed maximum recommended air pressure of 6 .2 bar (90 psig) .
• Take care to avoid entanglement of the moving parts of the tool with clothing, ties, hair, cleaning rags, etc .
• Keep hands clear of the rotating belt during use .
• If the tool appears to malfunction, remove from use immediately and arrange for service and repair .
Technical data
Mirka® PBS 10NV 10 x 330 mm 13NV 12.7 x 457 mm
Belt size 10–12 x 330 mm 12 .7 x 457 mm
Product net weight 0 .81 kg (1 .79 lbs) 0 .92 kg (2 .20 lbs)
Speed 17,000 /min 20,000 /min
Sound pressure level (L
pA
)
83 .8 dB 85 .7 dB
Sound power level (L
WA
) 94 .8 dB 96 .7 dB
Power 417 .6 W 522 W
Air consumption 610 l/min 800 l/min
Vibration level * 1 .88 m/s 2 1 .04 m/s 2
Uncertainty K * 0 .68 m/s
2
0 .59 m/s
2
The noise test is carried out in accordance with EN ISO 15744:2008 – Hand-held non-electric power tools – Noise measurement code
– Engineering method (grade 2) .
The vibration test is carried out in accordance with EN ISO 20643:2008 – Mechanical Vibration – Hand-held and Hand-guided
Machinery – Principles for Evaluation of Vibration Emission .
Specifications subject to change without prior notice . Model range may vary between markets .
* The values stated in the table are from laboratory testing in conformity with stated codes and standards, and are not
sufficient for risk evaluation . Values measured in a particular workplace may be higher than the declared values . The
actual exposure values and amount of risk or harm experienced by an individual are unique to each situation and
depend upon the surrounding environment, the way in which the individual works, the particular material being
worked, work-station design as well as upon the exposure time and the physical condition of the user . Mirka Ltd
cannot be held responsible for the consequences of using declared values instead of actual exposure values for any
individual risk assessment .