MIRKA 412, Manual, Page: 9 / 124

9
english
Mirka 412 / 415 / 415 M
7.2 Maintenance work
7.2.1 Replacing the waste
bag
1. Open the retaining clamps
and remove the upper sec-
tion of the cleaner from the
dirt tank.
2. Carefully remove the waste
bag connection (1) from the
inlet fitting.
3. Close the waste bag connec-
tion with the slide (2).
4. Close the waste bag using
the cable binder (3).
5. Dispose of the dirt in accord-
ance with legal regulations.
6. Insert a new filter bag into the
cleaned tank as described in
the instructions enclosed.
IMPORTANT: Press the filter
bag connection firmly on to
the inlet fitting.
7 Maintenance
7.1 Maintenance plan
After finishing work As required
7.2.1 Replacing the waste bag
7.2.2 Replacing the filter bag
7.2.3 Emptying dirt tank
7.2.4 Replacing filter element
Mirka 415M: Perform thoroughly
filter cleaning before replacing the
waste bag - see section 4.5.
Mirka 415M: During the following
work, ensure that dust is not unnec-
essarily spread around. Wear a P2
breathing mask.
1
2
3
7.2.2 Replacing the filter bag 1. Open the retaining clamps
and remove the upper sec-
tion of the cleaner from the
dirt tank.
2. Carefully remove the filter
bag connection from the inlet
fitting.
3. Close the filter bag connec-
tion with the slide.
4. Dispose of the filter bag in
accordance with legal regu-
lations.
5. Place a new filter bag into the
cleaned tank as described in
the instructions (printed on
the filter bag)
IMPORTANT: Press the filter
bag connection on the inlet
fitting as far as possible.
Mirka 415 M: During the following
work, ensure that dust is not unnec-
essarily spread around. Wear a P2
breathing mask.