Mircom TAS-2000 Series, User Manual

Page: 34 / 36

TAS-2000 NSL System Resident Operating Instructions
Mircom's state-of-the-art door entry system has been installed
in this building to provide you and your guest with an
increased level of confidence and security.
The system operates with your existing telephone. Your guest
simply dials your code number or selects your name by
scrolling through the electronic directory on the lobby unit,
causing your telephone to ring. When you answer your
telephone, you will be in communication with your guest.
To unlock the main door , press " 9 " on your telephone
keypad.
To refuse entry , hang up.
Call Waiting Feature
While engaged in a conversation with someone on your
outside telephone line, you will hear a distinct tone when a
guest places a call to you. Briefly push the hangup switch to
answer the call. This action will automatically put the outside
telephone line "on hold". While on-line with your guest, you
can open the main door by dialing the digit " 9 ". To refuse
entry, briefly press the hangup switch. Pressing “9” or the
hangup switch will automatically reconnect you to the
previously "on hold" caller to continue your conversation.
In a similar manner, you can answer an outside call while
talking to the guest in the lobby. Please note that you cannot
put your guest "on hold" because the talk time with your guest
is limited (normally 60 seconds).
Keyless Entry Codes
To unlock the front door without using a key, press “0”
followed by the four-digit keyless code. The last four digits are
confidentially assigned to each resident.